Holographic Fireplace Case Study
Holographic Fireplace Gen 2 PCBA
Coordinating video processing, display output, HDMI, USB, LVDS and product-control interfaces within one production-ready electronics platform.
The Challenge
Keep video, display and product-control interfaces working as one system
The holographic visual board must process media, drive the display path and exchange commands with the fireplace controller. Connector selection, power integrity and signal routing directly affect the product experience.
The Gen 2 PCBA must also remain practical to assemble, program, inspect and functionally test.
The Approach
Define every signal path before finalizing the board
- Map media input, video output, display and product-control interfaces.
- Review HDMI, USB, LVDS, power, MCU and connector placement together.
- Reserve programming, inspection and functional-test access.
- Verify the board with the target display and fireplace control system before release.
Control Architecture
Video and control interfaces on the Gen 2 platform
Video Processing
Coordinate media decoding and the output path for the holographic visual system.
HDMI Interface
Provide the required digital video input or output connection.
USB Media
Support service or media access according to the product definition.
LVDS Display
Connect the video-control board to the target display interface.
MCU Coordination
Exchange product state and user commands with the fireplace controller.
Production Access
Reserve programming, connector inspection and functional-test points.
Validation & Release
Test the complete video and display path
Functional validation covers power-up, media input, video output, display communication, USB and HDMI behavior, product-control commands and defined recovery states.
- Electrical checks before powered testing
- Programming and firmware version control
- HDMI, USB and LVDS interface verification
- Approved BOM, work instructions and test criteria
Production handoff
The approved hardware, firmware version, programming method, connector checks and functional-test criteria are carried into NPI and production.
Planning a holographic fireplace product?
Share the target display, video, media and control-interface requirements for an engineering review.
