Heating Products — Custom PCBA for Fireplaces & Heating Appliances
HS designs, prototypes and mass-produces custom heating PCBA for fireplaces and heating appliances, including electric, mist, alcohol and 3D holographic fireplaces, heated towel rails, garage heaters, heating tables and induction cookers. Each control board is engineered and assembled to your product requirements from prototype validation through mass production.
Talk to an engineer
Electric Fireplace PCBA
- Touch button + infrared control
- Flame 5-level brightness
- Flame 4 colors
- 2-level heating
- 0–9h timer
- Key + infrared control
- 5 brightness levels
- 7 flame colors
- 10 carbon-lamp colors, adjustable brightness
- 2-level heating
- 0–8h timer
- Button + infrared + app control
- -20°C to 80°C operating range
- Relay < 2500W; DC load < 60W
- Flame + carbon lamp 10 colors
- LED lamp 5 brightness levels
- Stepper motor 5 speeds
- 0–12h timer
Mist Fireplace PCBA
- Offline voice control, keys & RF remote
- 4-stage atomization, 1-min auto start
- Pump water fill & drain with auto stop
- Halogen flame, negative ions, wood sound
- 30s fan delay-off, 5s remote pairing
- Tuya WiFi app + full-touch large screen
- Atomization 0–8 levels, low-water auto cutoff
- 9 flame colors, 9-level brightness & speed
- Auto water refill, pump-up & drain
- Power-off memory, hidden settings menu
Alcohol Fireplace PCBA
- Real alcohol flame with auto fuel pump
- Dual-level liquid & tank sensing
- 4-level burning-wood sound effects
- 7 fault codes E1–E7 self-diagnosis
- Button & remote, 12V DC supply
Holographic Fireplace PCBA
- 3 holographic video flame forms (L1/L2/L0)
- 6 ember colors, 6 flame colors, auto cycle
- OFF / Lo / H1 heating, fan-first start
- 10s heat delay, 10s hold heat-key lock
- 0–9h timer, button & remote
- 5 video flames L01–L05 cycle
- 12 ember states: 6 colors + 6 breath
- Top light 4 states incl. mixed yellow-blue
- Lo/H1 heating, 10s fan interlock
- Flame sound SP0–SP3, 0–9h timer
- 3-screen independent or synced video
- IR remote + 9-key touch panel dual control
- Adjustable heating temperature control
- Video color, speed & flame sound adjust
- LVDS & HDMI, monochrome ember control
Towel Rail PCBA
- 3 drying levels: 45/50/60°C sterilize
- 3 modes: dry, 24h APP program, countdown
- WiFi APP control with online indicator
- °F/°C conversion
- < > and MODE keys, 5s auto confirm
- Standby key long-press 2s on/off
- Timer off 1–24h
- 115–155°F (10°F step) / 45–65°C (5°C step)
- Temp key long-press 2s °F/°C, default °F
- K1+K2 hold 3s shows actual temp
Heater PCBA
- Key, infrared control
- Heating key locks
- Switch machine memory
- Has a forced heating mod
- Tuya WiFi + APP hourly weekly schedule
- Manual 5–45°C, MODE weekly/manual
- APP timer 0–12h, auto time sync
- Child lock: + and − hold 5s
- E1 tip-over / E2 NTC open / E3 NTC short
Heating Table PCBA
- 3 heat zones, 0–5 steps each
- 7-step constant temp, 0–5h timer
- Dual-lift: table + mid-level, auto stop
- Full voice guide, 5-level volume
- Voice command control, 3h auto-off
Induction Cooker PCBA
- 1000W multi-stage power curve
- 8 cooking modes incl. rice-crust & wok-fry
- Steam time 1–59 min, function memory
- No-pot detect with visual alarm
- 3-tone buzzer feedback, standby display off
Heating PCBA — Frequently Asked Questions
What is a heating PCBA, and how is it different from standard board assembly?
A heating PCBA is the complete control board that drives a fireplace or heating appliance — flame LEDs, mist pumps, heaters, fans, displays and user controls — rather than a generic board. HS covers the full chain: DFM review, SMT/THT assembly, testing and NPI, delivering production-ready boards that match your enclosure and user interface.
Can you customize one of these heating boards to our exact requirements?
Yes. Every platform on this page is engineered to specification. HS adjusts layout, relay count and heating stages, display type, connectivity (WiFi/Tuya, RF/IR remote, voice) and firmware features — from a single modification on an existing platform to a fully new design developed with you.
What files do we need to provide for a custom heating board?
If you have an existing design: Gerber files, BOM and pick-and-place data are enough. If you start from a concept, only your requirements are needed — HS’s 35-person R&D team handles schematic capture, PCB layout and component selection in-house.
Do you support small prototype batches?
Yes. Projects can start with a small number of prototype sets to validate design and assembly before scaling to mass production. NRE, unit pricing and lead time are quoted per project after we review your requirements.
How do you ensure board quality?
Inspection and testing are included by default. The specific methods — AOI, X-ray, ICT, FCT — are defined per project based on your requirements, with test reports provided. Assembly follows IPC J-STD-001 under an ISO 9001 quality system (certificate No. 51824Q09327R0).
Which heating products do these platforms cover?
Our heating PCBA platforms cover electric fireplace control boards, mist and holographic fireplace controllers, heated towel rail control boards, garage heater control boards, heating table control boards and induction cooker control boards. The same design-to-manufacturing process can also be adapted to other custom heating appliances.
Need a custom heating PCBA?
From prototype to mass production, HS engineers, assembles and tests heating PCBA to your specification — SMT/THT, NPI and full turnkey delivery.
